– Chủ động điều hành/ kết nối giữa các máy
– Thiết kế giao diện dựa trên ứng dụng thực tế và yêu cầu khách hàng
– Xử lý nhanh
HMI – dòng NA
Chủ động điều hành/ kết nối giữa các máy
Thiết kế giao diện dựa trên ứng dụng thực tế và yêu cầu khách hàng
Xử lý nhanh
Omron Sysmac HMI cho phép kiểm soát và giám sát nhanh hơn, hiệu quả hơn – và tự nhiên hơn, chủ động hơn giữa người điều khiển và máy. Màn hình rộng: 7, 9, 12 và 15 inch
Thông số kỹ thuật
General Specifications
| Item | Specification | |||
|---|---|---|---|---|
| NA5-15W | NA5-12W | NA5-9W | NA5-7W | |
| Rated supply voltage | 24 VDC | |||
| Allowable power supply voltage range |
19.2 to 28.8 VDC (24 VDC ±20%) | |||
| Allowable momentary power interruption time |
Operation for momentary power interruption is not specified. | |||
| Power consumption | 47 W max. | 45 W max. | 40 W max. | 35 W max. |
| Ambient operating temperature |
0 to 50°C *1 *2 | |||
| Ambient storage temperature |
-20 to +60°C *3 | |||
| Ambient operating humidity |
10 to 90% *2 Must be no condensation. |
|||
| Atmosphere | Must be free from corrosive gases. | |||
| Pollution degree | 2 or less: JIS B 3502, IEC 61131-2 | |||
| Noise immunity | 2 kV on power supply line (Conforms to IEC 61000-4-4.) | |||
| Vibration resistance (during operation) |
Conforms to IEC 60068-2-6. 5 to 8.4 Hz with 3.5 mm half amplitude and 8.4 to 150 Hz with 9.8 m/s2 for 100 minutes each in X, Y, and Z directions (Time coefficient of 10 minutes ✕ coefficient factor of 10 = total time of 100 min.) |
|||
| Shock resistance (during operation) |
Conforms to IEC 60028-2-27. 147 m/s2 3 times each in X, Y, and Z directions |
|||
| Dimensions | 420 ✕ 291 ✕ 69 mm (W ✕ H ✕ D) |
340 ✕ 244 ✕ 69 mm (W ✕ H ✕ D) |
290 ✕ 190 ✕ 69 mm (W ✕ H ✕ D) |
236 ✕ 165 ✕ 69 mm (W ✕ H ✕ D) |
| Panel cutout dimensions |
392 +1,0 ✕ 268 +1,0 mm (horizontal ✕ vertical) Panel thickness: 1.6 to 6.0 mm *4 |
310 +1,0 ✕ 221 +1,0 mm (horizontal ✕ vertical) Panel thickness: 1.6 to 6.0 mm *4 |
261 +1,0 ✕ 166 +1,0 mm (horizontal ✕ vertical) Panel thickness: 1.6 to 6.0 mm *4 |
197 +0.5,0 ✕ 141 +0.5,0 mm (horizontal ✕ vertical) Panel thickness: 1.6 to 6.0 mm *4 |
| Weight | 3.2 kg max. | 2.3 kg max. | 1.7 kg max. | 1.3 kg max. |
| Degree of protection |
Front-panel controls: IP65 oil-proof type, UL Type 4X (at initial state) To reinstall the NA Unit in a panel, contact your OMRON representative for replacement of the rubber packing. |
|||
| Battery life | Battery life: 5 years at 25°C The RTC will be backed up for 5 days after the battery runs low. The RTC will be backed up by a super capacitor for 5 minutes after removing the old battery. (This assumes that the power is first turned ON for at least 5 minutes and then turned OFF.) |
|||
| International standards *5 |
UL 508/CSA standard C22.2 No.142 *6 EMC Directive (2004/108/EC) EN 61131-2: 2007 Shipbuilding standards LR, DNV, and NK IP65 oil-proof, UL Type 4X *7 (front panel only) ANSI 12.12.01 Class 1 Division 2/CSA standard C22.2 No. 213-M1987 (R2013) RoHS Directive (2002/95/EC) KC Standards KN 61000-6-2: 2012-06 for EMS and KN 61000-6-4: 2012-06 for EMI RCM |
|||
Link:
HMI-NA
HMI-NA